12V DC Cabinet Ventilation Cooling Ventilation Fan
TITAN cabinet ventilation fan provides and creates an efficient system to help the natural convection and cool down warmer air.
A cabinet needs a ventilation fan or ventilation systemAn ideal cabinet should contain an intake and an exhaust variable, which can be fans or ventilation holes. Poor designed systems are no other fans or ventilation holes to act as the air intake and exhaust. Electronics such as audio players, servers, and computers within a cabinet will cause the air to heat up and poor ventilation inside of cabinet. Due to natural convection, warmer air which is less dense than cooler air will rise on its own. Using fans to push air out will cause pressure within the cabinet. An efficient fan system helps accelerate natural convection.
How to mounted a ventilation fan in the cabinet?Due to the natural convection, warmer air which is less dense than cooler air will rise on its own. Using fans to push air out will cause pressure within the cabinet. There should be a fan or ventilation holes located near the top of the cabinet to exhaust out the air and a fan or ventilation holes located near the bottom to push air out.
TITAN cabinet fan could help you improve the cabinet ventilationTITAN fan could be installed within in the cabinet on the top or in the bottom to accelerate the convection and push the warmer air out and take cooler air in the cabinet. Features a special design racks and speed controller, you can apply to your home theater cabinet, audio/video cabinet, enclosed cabinet, and entertainment centers to cool down and improve the convection. TITAN cabinet fan is ultra-quiet and well-designed to be mounted to the cabinets.
- Outline Dimension: 184 x 92 x 30 mm
- Fan Dimension: 92 x 92 x 25 mm
- Rated Voltage: 12V DC
- Rated Current: 0.48 A
- Power Consumption: 5.76 W
- Rated Speed: 500~2600 RPM
- Airflow: 20.8~106 CFM
- Static Pressure: 0.05~1.2 Inch H₂O
- Noise Level: 5~28 dBA
- Bearing Type: Two ball
- Life Time: 50,000 Hours
- Outline Dimension:240x 120 x 30 mm
- Fan Dimension: 120 x 120 x 25 mm
- Rated Voltage: 12V DC
- Rated Current: 0.56 A
- Power Consumption: 6.72 W
- Rated Speed: 400~2000 RPM
- Airflow: 22.3~121.13 CFM
- Static Pressure: 0.05~0.12 Inch H₂O
- Noise Level: 6~32.9 dBA
- Connector: 3-PIN
- Bearing Type: Two ball
- Life Time: 50,000 Hours
- Outline Dimension: 85 x 37x 15.5mm
- Input Voltage: 12V DC
- Output Voltage: 7~13.8V DC
- Max Output Current: 1A
- Temperature Measuring: 20°C~ 45°C (500~2600RPM)
- Speed Level Range: See Table
|TTC-SC22 Manual Speed Range|
|Level 1||500 PRM|
|Level 2||1000 PRM|
|Level 3||1400 PRM|
|Level 4||1800 PRM|
|Level 5||2200 PRM|
|Level 6||2600 PRM|
|TTC-SC22(B) Manual Speed Range|
|Level 1||400 PRM|
|Level 2||700 PRM|
|Level 3||1000 PRM|
|Level 4||1300 PRM|
|Level 5||1600 PRM|
|Level 6||2000 PRM|
- 1CTN(PCS): 20
- N.W.(KGS): 6.8
- G.W.(KGS): 10.4
- Photo Gallery
- Related Videos
How to DIY build your cabinet ventilation fan
- Related Products
According to the RV fridge venting system, it would produce over-heating while operating. If the RV fridge couldn’t cool down the temperature, the RV fridge would too hot to keep food fresh and cool. It has been caused a common thermal problem for RV owner or RV designer. TITAN RV fridge ventilation fan is able to assist you to improve the RV fridge thermal problem and customize different RV fridge fan.
TITAN RV fan could customize refrigerator side vent to accelerate RV fridge circulation. Installed a RV fan inside of evaporator could help the heat out quickly. It is an active way exposing the heat source and to exhaust the heat out or pull fresh air in of the RV fridge to boost the performance of the RV fridge efficient.
TITAN RV fan could customize refrigerator roof vent to improve RV fridge circulation. The rooftop vent is also the key to cool down the RV fridge temperature. The roof vent usually is made of UV-resistant to stand up against sun rays. The fan equipped with IP55 waterproof is identical to rooftop RV fridge vent fan. TITAN could also provide various function design such as the auto temperature detection and timer setting to achieve the power saving.
TTC-SC20(A), TTC-SC20(B), TTC-SC20(C)
TITAN 12V DC Double Rack fan is equipped with 6-levels timer setting and speed control. The fan has the mode of auto and manual, you can both has a whisper operation experience and perfect cooling performance. Equipped with IP55 Waterproof function, it is perfect for outdoor use. Besides, with functional rack mounting set and 6-levles timer setting, you can easily install on any places near the device you want to cool down and reinforce ventilation immediately and controll the time of operation. 12V Double fan is great for RV vent fan, RV top ventilation fan, Motorhome Side window fan, RV fridge fan, bus conversion fan, Skoolie venilation fan, or ventilation cabinet fan.
Updated version for TITAN RV window double fan. The fan is equipped with two TITAN exclusive 9-blades silent fans and with the function of reversible airflow to ventilate and cool down the temperature in anyplace such as motorhomes, travel trucks, houses, drivers cabs and so on.There is an wireless controller with 6 speed levels and 7 timer settings. It is easy to switch the airflow direction for drawing fresh air in or extracting stale air out and select the comfort speed as well as turn off time. It allows quickly heat transfer and fresh air circulation. By 12V DC current and 280 CMF airflow amount, this roof window fan can increase over 80% flow efficiency of room, toilet or kitchen in your motorhome.Moreover, the thickness of fan is only 34mm. The roof window can be closed or opened without dismounting the double fan. It is suitable for roof window insect screens without dismounting it.
- Question Match Product: All RV fan seriesHello, below is the differences for all TITAN Multi-Purpose Rack fan, you can refer it.Yes. TITAN RV fan series are designed to help cool down the RV refrigerator, and we advise to be installed on close to evaporator of the refrigerator to improve ventilation. But the temperature of fridge cooling fins would not be over 70℃. Please carefully notice the surrounding temperature. There is a probe to detect the temperature of the environment near the evaporator of the refrigerator. We suggest to place the sensor in about 1 inch freely suspended to the evaporator because there is the warmest area.Yes. TITAN RV fan series has the product to be designed to the outside fridge vents. We could also customize unique RV fan for your need. You can install the TITAN RV fan in both lower and upper ventilation vents. The correct mounted way is that bottom RV side vent mounts the fan to push fresh air in, and RV upper side vent near the top mounts the fan to exhaust the heat out. The way of installation complies with the air circulation rules: hot air rises and cold air sinks. It is the key to quickly boost the air circulation of the RV fridge.There are various places with the need of ventilation such as RV fridge, RV window, Bathroom& Toilet, and kitchen. According to the need of RV ventilation, TITAN designs a series cooling fan solution to RV design, RV customer. You could check the information in other page.Yes. You just have to place it in vent area after taking off the cover and modify how you would/will secure it. It is very easy and does help. But you might have to lengthen the wires. We have a video which the fan is be mounted to the roof vent. You can make it as reference.There are two nacked wires, a red (positive polarity) and black wire (negative polarity) that leads from the control panel of the fan. Connected those to the 12V power supply and hook those wires to the same polarity source (positive to positive/ negative to negative).TITAN Multi-purpose rack fan series is designed to DIY mounted. You can depend on the function you want to choose such as timer setting, waterproof function, reversible airflow function, etc. They can be installed on fridge vent, top roof vent, cabinet, table, side window as so on. Below is the differences chart for all series to refer.There also is some introduction video from YouTuber. You can make it as references.Fan speed varies from 45F to 113F, it is supposed to shut off below 45F but in reality neither one of mine ever shut off even down to freezing, they do reach maximum speed by 113F and above.Hello, owing to this product is DC fan, the amperage of the fan is low. I can offer you the rated current. of the fans. Please see below. Hope it is clear for you. Thank you.TTC-SC09(A) 90mm is 0.48 A. TTC-SC09(B) 120mm is 0.56 A. TTC-SC09(C) 140mm is 0.8 A. Maximum Output Current of the speed controller is 1A.The common RV fridge has two ventilation side vents, upper and bottom. The correct mounted way is that bottom RV side vent mounts the fan to push fresh air in, and RV upper side vent near the top mounts the fan to exhaust the heat out. The way of installation complies with the air circulation rules: hot air rises and cold air sinks. It is the key to quickly boost the air circulation of the RV fridge. You are based on to the need to mount them.No. Please do not attempt to revise the polarity. It would not change airflow by revising the polarity. It will only cause permanent damage to the fan controller.Please kindly check below instrucitons, and notice the voltages, wires, speed controller, and fan itself before installation.Owing to the probe is to detect outside air temperature, we suggest you could place the sensor near about an inch from the highest of heating rising. But you may research the heat of your place to ensure the proper placement.Yes. The “Y” harness combines the two fans power leads. Nevertheless, please kindly notice that the fan cable need to connect with our speed controller and do not connect with others, or both of them would not work. The fan splitter cable is specially designed to compatible with the speed controller.The speed controller can be mounted on any places. But we suggest you should place it from outside of vent, so that you can easily control and switch them according to different needs There are two ways to install the controller. You can drill a small hole and thread the wires through. Or you can attach the sticker on the wall.No. The fan speed would not increase the fan speed by connect over the power over 12 voltages. If you connect over 12 voltages, the fan may cause permanent damage.Please follow the bellow instruction to make a self-trobleshoopting. If there are still problems with the fan or speed controller, please kinldy contact us. We would assist you as fast as we could.No. The fan is not required to be installed battery. It has the power connector of 12 Volts.The major function of fan bearing is to make fan blades operated fluently. The purpose of fan bearing is to reduce rotational friction and support axial loads. The fan bearing is the most critical factor in fan lifetime and fan performance. Without fan bearing, a cooling fan cannot work. When choosing a cooling fan, it considers not only airflow and static pressure but also the reliability of fan itself. It determines if a cooling fan can run consistently many years. The fan bearing is the critical role of fan.TITAN have three major bearing types: Sleeve bearing, Z-AXIS bearing, and Ball bearing. All the cooling fan depends on various need, lifetime, and characteristics to determine bearing choice.Sleeve Bearing: 25°C, lifetime- 25,000 hours Two Ball Bearing: 25°C, Lifetime- 50,000 hours Z-AXIS Bearing: 25°C, Lifetime- 60,000 hoursThere are three critical cooling fan components: IC, Bearing, and Fan blades.Fan bearing defines the lifetime of the cooling fan. According to different bearing types and environment temperature, there is also little difference in a fan lifetime. Following is references:Sleeve Bearing: 25°C, lifetime- 25,000 Hours Z-AXIS Bearing: 25°C, Lifetime- 60,000 Hours Ball Bearing: 25°C, Lifetime- 50,000 HoursYou can choose by working environment and fan characteristics.(1) Fan environment temperature is higher than 40°C, we would suggest Ball Bearing cooling fan. (2) Fan environment temperature is between 25 °C - and needs to a longer fan lifetime, we would suggest you choose Z-AXIS bearing cooling fan. (3) If you have cost consideration and workplace temperature is also between 25-40°C, we would suggest you choose Sleeve bearing cooling fan.If you have further consideration and particular need, please directly contact us. We will give you recommend.
- 2018 Computex Taipei
TITAN will participate in Computex Taipei held on June 5- June 9, 2018. Show our latest cooling fan and related computer cooler.Read More
- USB Tower Cooling Fan for Car & Baby Stroller
This is a USB tower cooling fan for car fan, baby stroller fan, wheelchairs fan or office fan etc.Read More
- USB Ultra-Silent Cooling Fan
Equipped with 140mm professional cooling fan. It is strong airflow, ultra-quiet, and log life time.Read More