[RV fan] How do you install the TITAN RV fan to the electric source?
There are two nacked wires, a red (positive polarity) and black wire (negative polarity) that leads from the control panel of the fan. Connected those to the 12V power supply and hook those wires to the same polarity source (positive to positive/ negative to negative).
If you have any further questions or would like to make an offer, please kindly contact us. We would be happy to advise you on the product that best meets your needs
The illustration of fan cable
Naked power cable side (lead from the controller)
The black wire is negative and the red one is positive. Connect those to the power supply of 12V DC. Please take care of the correct polarity (positive to positive/ negative to negative). Please ensure that power is 12V DC and make sure the power supply works normally before connecting.
Temperature sensor (lead from the controller)
There is a probe to detect the temperature of the environment near the evaporator of the refrigerator. We suggest to place the sensor in about 1 inch freely suspended to the evaporator because there is the warmest area.
Fan cable (lead from the controller)
The length of 3-pin fan cable is 2M. Please connect it to the 3-pin Y-cable.
Y-cable
The 3-pin Y-cable powers the double fan. It combines fan and speed controller. Please notice that the fan cable need to be connected with the speed controller. Don’t connect it anywhere else, otherwise speed controller and fan will not work properly. The fan splitter cable is specially designed to be only compatible with the speed controller.
- Products
Custom RV Fridge Vent Grille/ 12V DC IP55 Waterproof Mount Ventilation Cooling fan
TTC-SC22
According to the RV fridge venting system, it would produce over-heating while operating. If the RV fridge...
Details
Custom for RV Refrigerator inside of the evaporator/ 12V DC IP55 Waterproof Mount fan
TTC-SC20 Series
TITAN RV fan could customize refrigerator side vent to accelerate RV fridge circulation. Installed...
DetailsCustom for RV Refrigerator Rooftop Vent/ 12V DC IP55 Waterproof Mount fan
TTC-SC20 Series
TITAN RV fan could customize refrigerator roof vent to improve RV fridge circulation. The rooftop...
Details
Custom RV Double Rooftop Window Ventilation RV fan
RV Window fan Custom
RV skylights or roof window are a great option in any RV, providing natural light and fresh...
Details- Other FAQ
Yes. TITAN RV fan series are designed to help cool down the RV refrigerator, and we advise to be installed on close to evaporator of the refrigerator to improve ventilation. But the temperature of fridge...
Read moreYes. TITAN RV fan series has the product to be designed to the outside fridge vents. We could also customize unique RV fan for your need. You can install the TITAN RV fan in both lower and upper ventilation...
Read moreThere are various places with the need of ventilation such as RV fridge, RV window, Bathroom& Toilet, and kitchen. According to the need of RV ventilation, TITAN designs a series cooling fan solution to RV design,...
Read moreYes. You just have to place it in vent area after taking off the cover and modify how you would/will secure it. It is very easy and does help. But you might have to lengthen the wires. We have a video...
Read moreThere are two nacked wires, a red (positive polarity) and black wire (negative polarity) that leads from the control panel of the fan. Connected those to the 12V power supply and hook those wires to the same...
Read moreTITAN Multi-purpose rack fan series is designed to DIY mounted. You can depend on the function you want to choose such as timer setting, waterproof function, reversible airflow function, etc. They can be installed...
Read moreFan speed varies from 45F to 113F, it is supposed to shut off below 45F but in reality neither one of mine ever shut off even down to freezing, they do reach maximum speed by 113F and above.
Read moreHello, owing to this product is DC fan, the amperage of the fan is low. I can offer you the rated current. of the fans. Please see below. Hope it is clear for you. Thank you.TTC-SC09(A) 90mm is 0.48...
Read moreThe common RV fridge typically features two ventilation side vents, one at the top and the other at the bottom. The recommended installation method involves mounting a fan at the bottom RV side vent to push...
Read moreTITAN fan is not equipped with this function, please do not attempt to revise the polarity connection of a fan to change the direction of airflow. It would only cause permanent damage to the fan controller.In...
Read morePlease kindly check below instrucitons, and notice the voltages, wires, speed controller, and fan itself before installation.If you have any further questions or would like to make an offer, please...
Read moreOwing to the probe is to detect outside air temperature, we suggest you could place the sensor near about an inch from the highest of heating rising. But you may research the heat of your place to ensure...
Read moreIn general, the answer to this question depends on the specific model of the RV fan you are referring to, as different models may have different features and installation requirements.However, many RV fans...
Read moreNo. The fan speed would not increase the fan speed by connect over the power over 12 voltages. If you connect over 12 voltages, the fan may cause permanent damage.
Read moreYes. The “Y” harness combines the two fans power leads. Nevertheless, please kindly notice that the fan cable need to connect with our speed controller and do not connect with others, or both of them...
Read moreIt depends on the type of fan and speed controller you have. The TITAN fan does not require a battery to be installed. It has a 12-volt power connectorMake sure to read the instructions that come with...
Read more