Какие типы подшипников вентилятора для охлаждения?

Компания Titan основанна в 1989 году в Тайване, является выдающимся лидером в области охлаждения процессора с энтузиазмом и элитной инженерной командой. Под лозунгом «Прохлада в жизни» мы постоянно предоставляем инновационные охлаждающие продукты, вдохновленные жизненными потребностями, необходимостью в процессоре охлаждении.

Какие типы подшипников вентилятора для охлаждения?

Titan имеет три основных типа подшипников: подшипник S, подшипник Z и подшипник B. Все охлаждающие вентиляторы зависят от различных потребностей, срока службы и характеристик, определяющих выбор подшипника.

Подшипник S: 25 ° C, срок службы - 25000 часов
Подшипника B: 25 ° C, срок службы - 50 000 часов
Подшипник Z: 25 ° C, срок службы - 60 000 часов


Fan bearing comparison

Fan bearing typeRecommendLifetime
(25°)
NoiseUnit PriceTITAN Model

Sleeve Bearing

Operation: 25-40°C

Consider fan cost

25,000 hours

Quieter at low speed in early life

Lowest

S

One Ball & One Sleeve

Environment temperature is higher than 40°C35,000 hours

Quieter at high-speed

High

C

Two Ball Bearing

Environment temperature is higher than 40°C50,000 hours

Quieter at high-speed

highest

B

One Ball Bearing

1. Environment temperature is higher than 40°C
2. Suitable for Slim fan

50,000 hours

Quieter at high-speed 

Quieter than Two Ball bearing

Medium

Z-axis Bearing

1. Operation: 25-40°C

2. Consider longer fan lifetime

3. Consider balance performance and cost

60,000 hours

 

Low

Z

TITAN Fan Bearing Comparison Chart

TITAN lifetime and operation temperature comparison chart

TITAN Model Illustration 

TITAN cooling fan model illustration

Brief Information of Fan Bearing: Sleeve bearing, ball bearing, and Z-Axis bearing

Sleeve Bearing 

Sleeve bearing uses oil-base substances as lubrication to reduce friction in operation. The sleeve bearing is the most common bearing types of cooling fan and usually cheapest, but it has the problem of lubrication issue. If the lubricant of fan bearing evaporates and leaks, the fan system would be destroyed and became loudly. The sleeve bearing has a greater concentration of oil lubrication. Therefore, a sleeve bearing fan is most likely to evaporate and became noise in later life.

  • Recommend: operation temperature between 25-40°C, consider lower fan cost
  • Suitable for low-speed rate and below 90mm cooling fan
  • Lifetime (25°C): 25,000 hours
  • Noise: Quieter at low speeds in early life
  • Cost: Lowest
  • TITAN bearing model: S

Ball Bearing 

The ball bearing is a component of balls between the rings and designed to reduce friction and easily rotated. It has a longer lifetime (50,000 hours in 25°C) than sleeve bearing. A ball bearing fan is suitable for higher temperature operation and run more quietly at the high-speed but noisier at the low-speed. 

  • Recommend: operation environment is higher than 40°C
  • Lifetime(25°C): 50,000 hours
  • Noise: Quieter at high speeds
  • Cost: Higher 
  • TITAN bearing model: B

Z-Axis Bearing

TITAN exclusive design fan bearing

TITAN Z-Axis fan bearing is a progress bearing which is fixed the weakness of sleeve bearing and ball bearing. It both has cheaper cost than ball bearing and longer lifetime and reliability than sleeve bearing. TITAN Z-axis bearing is reliable on the worldwide client as well. 

  • Recommend: Operation temperature between 25-40°C and need longer fan lifetime
  • Lifetime(25°C): 60,000 hours
  • Noise: fixed the problem of concentration of oil in sleeve bearing.
  • Cost: Low
  • TITAN bearing model: Z
Другие ЧАВО

Основная функция подшипников вентилятора - обеспечить плавную работу лопастей вентилятора. Подшипник вентилятора...

Читать далее

Titan имеет три основных типа подшипников: подшипник S, подшипник Z и подшипник B. Все охлаждающие вентиляторы зависят...

Читать далее

Существует три важных компонента охлаждающего вентилятора: Интегральная схема, подшипник и лопасти вентилятора.Подшипник...

Читать далее

Вы можете выбирать по рабочей среде и характеристикам вентилятора.(1) Температура окружающей среды вентилятора...

Читать далее

TITAN Введение