Home > Products > CPU coolers > Intel Socket 478/775 series

	Step 1 Apply the thermal grease to the CPU.
	Step 2 Pull up the lever to release the fan from the heat sink.
	Step 3 Place the heat sink on the CPU.
	Step 4 Use the clips to secure the heat sink to the socket.
	Step 5 Choose an appropriate direction for the bracket and then place it on the heat sink.
	Step 6 Push down the lever to secure the fan to the heat sink.
	Step 7 Install the speed controller to a 3.5" front bay.
	Step 8 Connect the fan to the fan speed controller.
	Step 9 Connect the fan speed controller to the 3-pin fan header on the motherboard.
	Step 10 Complete.