Home > Products > VGA Coolers >E lena TEC VGA Cooler

	Step 1 Remove the protective film.
	Step 2 Check your VGA card’s mounting holes (Type A or Type B).
	Step 3 Tighten the bolts into place, and it’s suggested to use pliers to tighten the bolts securely.
	Step 4 Spread thermal grease evenly on the GPU.
	Step 5 Insert the bolts through the mounting holes.
	Step 6 Put the back plate through the bolts.
	Step 7 Use a screwdriver to tighten the spring screws.
	Step 8 Check if there is any gap between the cooler and the VGA card.
	Step 9 Connect the power cable.