Remove the original cooler from the VGA card and then clean the GPU surface.
Step 2
Apply an appropriate amount of thermal grease on the GPU.
Step 3
Insert the 2 white push pins into the holes.
Step 4
Place the cooler on the GPU, push the pins into the VGA card and check if it is secured.
Step 5
Choose a fan cover and tighten with screws.
Step 6
Remove RAM heatsink stickers and then stick heatsinks to appropriate positions.
Step 7
Connect the connector to the VGA card. If the VGA card does not support the 3-pin connector, please use the supplied cable (3-pin to 4-pin) to connect the power supply
Step 1
