Aim the bracket at the motherboard’s hole and then put the screw into the hole.
Step 3
Hold the bracket and the motherboard and then put it upside down to put the transparent washer.
(PS: Before put the motherboard upside down, please place a soft pad to avoid damaging the motherboard.)
Step 4
Tighten the screw nut.
(PS. Suggest to tight the screw nuts in a diagonal sequence to make the pressure even)
Step 5
Turn over the motherboard and then spread the thermal grease.
Step 6
Place the cooler into the bracket.
Step 7
Push the steel part to the bracket.
Step 8
Connect the fan’s power connector to the motherboard.
Step 1
