Step 1

Remove the original VGA cooler.

Step 2

Remove the stickers on the heatsinks and then place the heatsinks on appropriate positions.

Step 3

Find suitable mounting holes i.e.

(A)54.8mm,(B)79.7mm,(C)75.4mm,(D)61.1mm

Step 4

Fix the bolts to the VGA cooler according to the VGA card’s holes. Notice:Make sure to place the washers on the bolts.

Step 5

Apply the thermal grease evenly and then place the cooler on the GPU.

Step 6

Turn to the other side of the VGA card.place the washers on the bolts first and then screw the nuts and use a screwdriver to tighten them.

Step 7

Install the VGA card and then plug in the power connector.Complete!