Home > Products > CPU coolers > DC-775K925Z / R

	Step 1 Clean old thermal grease from the CPU.
	Step 2 Spread new thermal grease evenly on the CPU.
	Step 3 In sequence, turn the 4 clips clockwise to the end.
	Step 4 Place the cooler and aim the 4 clips at the holes of the motherboard.
	Step 5 Hold the cooler and push down the 4 clips one by one.
	Step 6 Connect the fan connector to the motherboard, complete.
Demounting steps:
	Step 1 In sequence, turn the clips counterclockwise to the end.
	Step 2 Hold the cooler and pull the 4 clips one by one.
	Step 3 Now, it’s OK to demount the cooler.